Removal

1GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE

Service Precautions

2. DRAIN ENGINE COOLANT Service and Repair

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

4. REMOVE V-BANK COVER Removal

5. REMOVE AIR CLEANER ASSEMBLY Removal

6. REMOVE INTAKE AIR SURGE TANK Removal

7. DISCONNECT FUEL PIPE SUB-ASSEMBLY NO.2 Removal

8. REMOVE ENGINE COOLANT TEMPERATURE SENSOR





(a) Disconnect the connector.

(b) Using a 19 mm deep socket wrench, remove the water temperature sensor and gasket.