Installation

U760E AUTOMATIC TRANSAXLE: TCM: INSTALLATION

1. INSTALL TCM

(a) Install the TCM to the transaxle.

(b) Install and tighten the 2 bolts in the order shown in the illustration.





Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

(c) Connect the connector to the TCM.





(d) Turn the lock lever and secure the connector with the lock lever.

2. INSTALL NO. 1 INLET AIR CLEANER Installation

3. INSTALL AIR CLEANER BRACKET Installation

4. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

5. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY Installation

6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation

7. INSTALL NO. 2 INLET AIR CLEANER Installation

8. INSTALL BATTERY Installation

9. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

10. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

11. INSTALL EJECTOR TUBE Installation

12. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Installation

13. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Installation

14. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH Installation

15. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH Installation

16. INSTALL COOL AIR INTAKE DUCT SEAL Installation

17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

18. PERFORM TCM REGISTRATION

HINT
Service Precautions