LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2002 >> RAV4 Base, FWD, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Control System & Component Testing - 4-Cylinder >> Modules, Motors, Relays & Solenoids >> A/C Compressor Clutch Relay >> MR2

A/C Compressor Clutch Relay: MR2

  1. Remove A/C compressor clutch relay from relay box on firewall at driver's side front corner of engine compartment. See Figure.
  2. To test A/C compressor clutch relay continuity, using ohmmeter, check for continuity and no continuity between specified terminals on A/C compressor clutch relay. See Fig 1.
  3. To test A/C compressor clutch relay operation, apply battery voltage and ground to A/C compressor clutch relay. Using ohmmeter, check for continuity between specified terminals on A/C compressor clutch relay. See Fig 1. Replace A/C compressor clutch relay if defective.
    Fig 1: Testing A/C Compressor Clutch Relay (MR2) Or A/F Heater Relay (RAV4)
    G97C06258Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals