Installation

2GR-FE ENGINE CONTROL: MASS AIR FLOW METER: INSTALLATION

HINT
Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly Programming and Relearning.

1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

(a) Install the mass air flow meter with the 2 screws.

NOTICE:
Make sure that the O-ring is not cracked or does not jump out of position during installation.

HINT
Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly Programming and Relearning.

(b) Connect the mass air flow meter connector.