Selectable Functions When Using VAG 1551/1552 or VAS 5051

List of Selectable Functions

01 - Check Control Module Version See Performing On Board Diagnostic (OBD) Scan Tool VAG 1551, Connecting
02 - Check DTC memory.
03 - Output Diagnostic Test Mode. Output Diagnostic Test Mode (DTM) (Function 03)
05 - Erase DTC memory. Clearing Trouble Codes - 5 Speed Automatic 01V
06 - End output
07 - Code control module. Code Control Module (Function 07) - 5 Speed Automatic 01V
08 - Read measured valve block. Reading

Further functions, which can be printed out by pressing the HELP key, need not be considered.
- After checking a function the V.A.G 1551 returns to the following start position:

Indicated on display:


Rapid data transfer HELP
Select function XX