Selector Mechanism Assembly Overview

Selector Mechanism Assembly Overview





1 Selector lever handle

• Removing and installing, refer to --> [ Selector Lever Handle ] Selector Lever Handle.

2 Clip

3 Selector

4 Emblem

• Self-adhesive.

5 Sleeve

6 Cover

• With selector indicator.

• Removing and installing, refer to --> [ Shift Mechanism Cover ] Shift Mechanism Cover.

7 Printed circuit board

• With Tiptronic switch (F189).

8 Cover strips/frame

• Removing and installing, Refer to --> [ Cover Strips/Frame ] Cover Strips/Frame.

• Be careful of the Tiptronic switch (F189) signal magnet in the cover strips. Refer to --> [ Tiptronic Switch Signal Magnet ] Tiptronic Switch Signal Magnet.

9 Line

• Removing and installing, refer to --> [ Selector Lever Park Position Lock Switch ] Selector Lever Park Position Lock Switch.

10 Shift lock solenoid (N110)

• Removing and installing, refer to --> [ Shift Lock Solenoid ] Shift Lock Solenoid.

11 Selector lever park position solenoid (N380)

• Removing and installing, refer to --> [ Selector Lever Manual Release ] Selector Lever Manual Release.

12 Bolt, 20 Nm

• Quantity: 4

13 Bracket

14 Bracket

15 Selector mechanism

• With shift lock solenoid (N110) and selector lever park position solenoid (N380).

• Can be removed upward.

16 Bolt

• Adjusting, refer to --> [ Adjusting ] Procedures.

17 Mounting bracket/cover

• Can only be removed downward.

18 Retaining washer

• Always replace.

19 Selector lever cable

• Is removed together with selector mechanism --> [ (Item 15) Selector mechanism ].

• Adjusting, refer to --> [ Adjusting ] Procedures.

20 Retaining washer

• Always replace.

21 Mounting bracket

• For selector lever cable on transmission.

• When tightening, ensure the bracket does not distort.

22 Bolt

• Self locking.

• Always replace.

• Allocation.

• The threaded holes in the transmission for the bolts must always be cleaned. (e.g. with a thread tap).

Tightening Specifications

• M6 bolt = 10 Nm

• M8 bolt = 23 Nm