Removal and Replacement

One Piece Intake Manifold

Air Filter Housing Overview





1 Regulator Flap

• Only on cold climate vehicles.

• With a thermal element.

• Intake air pre-heating, checking. Refer to => [ Intake Air Pre-Heating, Checking ] One Piece Intake Manifold.

2 Bolt

• 2 Nm

3 to Suction Jet Pump

• Suction jet pump overview, refer to => [ Suction Jet Pump Overview ]. Suction Jet Pump Overview

4 Connecting Hose

• To the throttle valve control module (J338).

5 Filter Element

6 Mass Airflow (MAF) Sensor (G70)

7 Seal

• Replace if damaged.

8 Upper Air Filter Housing

9 Bolt

• 2 Nm

10 Connection

• Clipped into the upper air filter housing.

11 Nut

• 8 Nm

12 Cover

13 Air Duct

• Secured to the lock carrier.

14 Bolt

• 5 Nm

15 Gasket

• Replace if damaged.

16 Rubber Bushing

17 Bolt

• 10 Nm

18 Bracket

• For the air filter housing.

19 Mounting Pin

• 9 Nm

20 Connection

• For the warm air intake.

• Not installed on all vehicles.

21 Lower Air Filter Housing