Operation CHARM: Car repair manuals for everyone.

Fuel Pressure, Checking






Fuel Pump, Checking

When replacing the fuel delivery unit, check the fuel tank for visible contamination and clean if necessary.

Special tools, testers and auxiliary items required

Pressure Tester (VAS 6550)

Remote Control (V.A.G 1348/3A)

Test Instrument Adapter/DSO (5-pin) (VAS 5565)

Multi-meter (V.A.G 1715)

Wrench (T10202)

Measuring Container, 2 Liter

Fuel Pressure, Checking

Conditions

The fuel pump function must be checked. Refer to => [ Function and Voltage Supply, Checking ]. Function and Voltage Supply, Checking

Sequence

Read safety precautions before beginning work. Refer to => [ Safety Precautions ] Fuel Supply.

- Observe the rules for cleanliness. Refer to => [ Clean Working Conditions ] Fuel Supply.

CAUTION!
The fuel system is under pressure!

Wear protective goggles and protective clothing to prevent injuries and contact with skin.

Before disconnecting the connection, place a cloth around the connection point. Then release pressure by carefully disconnecting the connection.

- Disconnect the supply line (metal coupling) - arrow - and collect any leaking fuel in a cloth.





Press in the securing ring to disengage the fuel line.

- Connect the (VAS 6550) to the fuel supply line using (VAS 6550/1) and (VAS 6550/2).





- Make sure the drain is closed and the shut off valves are open.

- Activate the fuel pump with output Diagnostic Test Mode (DTM) to build fuel pressure.

- Check the fuel pressure on the (VAS 6550).

Specified value: 4.0 to 7.0 bar.

If the fuel pressure is OK, check the residual pressure. Refer to => [ Residual Pressure, Checking ]. Residual Pressure, Checking

If the Specification is Exceeded

- Pressure relief valve in the flange is malfunctioning, replace the flange with the fuel filter - item 20 -=> [ Flange with Fuel Filter ] Fuel Tank and Components Overview.

If the Specification is Not Obtained:

- Check the fuel lines for possible restrictions (kinks) or blockages.

If no malfunction can be found:

- Replace the flange with the fuel filter and pressure relief valve - item 20 -=> [ Flange with Fuel Filter ] Fuel Tank and Components Overview.

- Repeat the test.

If specified value is again not obtained:

- Replace the fuel delivery unit if the fuel pump is faulty. Refer to => [ Fuel Delivery Unit ] Fuel System Components.