Selector Mechanism Overview

Selector Mechanism Overview





1 Shift cover with knob

• Do not remove knob if not necessary. For emergency release, only cover must be removed => [ Selector Lever Emergency Release ] Service and Repair.

• Before removing knob, pull button past pressure point and secure using cable tie or suitable wire. This prevents the button from being pressed into the handle unintentionally.

• If button is pushed in when knob is removed:

- Before attaching knob, always pull out button past tangible pressure point

2 Shift mechanism with selector lever

• Removing and installing => [ Shift Mechanism with Selector Lever ] Shift Mechanism With Selector Lever

3 Bolt with spring

• 3 Nm

4 Pin

• Removing => [ Selector Lever Cable ] Removal and Replacement

• Do not grease

5 Securing plate

• Always replace after removal

6 Nut

• 9 Nm

• Quantity: 4

7 Shift housing

• With seal

8 Selector lever cable

• Do not grease cable.

• Removing and installing => [ Selector Lever Cable ] Removal and Replacement

• Checking => [ Selector Lever Cable, Checking ] Testing and Inspection

• Adjusting => [ Selector Lever Cable, Adjusting ] Adjustments

9 Hex bolt with washer

• 8 Nm

• Quantity: 4