EVAP System Assembly Overview
EVAP System Assembly Overview
1 (EVAP) Evaporative Emission Filter
2 Bolt, 8 Nm
3 Bushing
4 Evaporative Emission (EVAP) Canister
• Component location: Bottom of the spare tire wheelwell.
• Removing and installing, refer to => [ EVAP Canister ] Service and Repair.
5 Nut, 6 Nm
6 Bracket
7 Support
8 Bracket
9 Bolt, 4 Nm
10 Rubber Grommet
11 Washer
12 Bolt, 8 Nm
13 Vacuum Line
• To the engine.
14 Leak Detection Pump (LDP) (V144)
• Component location: Under the right rear wheel housing liner in the wheel housing.
• Removing and installing, refer to => [ Leak Detection Pump ] Service and Repair.
• Checking fuel supply system for leaks. Refer to => [ Fuel/EVAP System, Checking for Leaks ] Fuel/EVAP System, Checking for Leaks.
15 Bolt, 4 Nm
16 Connecting Hose
17 Clamp
18 Air Filter Housing
• For the LDP.
19 Bracket
20 Connecting Pipe
• Clipped onto the bracket.
• To disconnect, press the release button on the connection piece.
21 Vent Line
• To the fuel tank filler tube.
• To disconnect, press the release button on the connection piece.
22 Vent Line
• To disconnect, press the release button on the connection piece.
23 Vent Line
• To the EVAP canister purge regulator valve.
• To disconnect, press the release button on the connection piece.