Selector Mechanism Overview, from 03.2009

Selector Mechanism Overview, from 03.2009

CAUTION!
Shift the selector lever into P and engage the parking brake before working with the engine running.





1 Shift Handle with Cover

• Do not remove the knob if not necessary. For emergency release, only cover must be removed. Refer to => [ Selector Lever Manual Release ] Procedures.

• Pull the locking button past its pressure point before remove the handle. Secure the locking button with a tie wrap or with wire. This prevents the locking button from being pushed back into knob accidentally.

• Removing and installing, refer to => [ Shift Handle with Cover ] Removal and Replacement.

2 Selector Lever and Mechanism with Cable

• With the shift lock solenoid (N110).

• Do not grease cable.

• Removing and installing, refer to => [ Selector Lever and Mechanism with Cable, from 03.2009 ] Selector Lever and Mechanism with Cable, from 03.2009.

• Checking, refer to => [ Selector Lever Cable, Checking through 02.2009 ] Selector Lever Cable, Checking through 02.2009.

• Adjusting, refer to => [ Selector Lever Cable Adjustment, through 02.2009 ] Adjustments.

3 Bolt

• 8 Nm

4 Nut with Collar

• 8 Nm

• Quantity: 4

5 Shift Housing

6 Securing Plate

• Always replace after removing.

7 Securing Plate

• Always replace after removing.