B10B0

B10B0 - Infrared Sensor Thermistor Circuit Low

For a complete wiring diagram, refer to.

• When Monitored: With the ignition on.

• Set Condition: If the IR sensor fails the internal self test.






• This DTC must be active for the results of this test to be valid. Do not perform this test if this DTC is stored.

Test Step 1 - Replace the A/C heater control

Repair

• Replace the A/C heater control.

• Perform the HVAC Verification Test. Refer to => Non-DTC Based Diagnostics. HVAC Verification Test