Seat Cover and Cushion

Seat Cover and Cushion

Special tools, testers and auxiliary items required

• Trim Removal Wedge (RMCP101)

• On leather trimmed seats, cushion cover can be removed from the cushion foam pad. On cloth trimmed seats, the cushion cover does not separate from the foam pad.

Removing

- Remove seat from vehicle. Refer to => [ Seat ] Seat.

- Remove screws securing the rear grocery bag holders.

- Remove inboard and outboard recliner covers.

- Using trim removal wedge (RMCP101) , remove pull strap bezel.

- Unzip both sides of the seat covers.

- Disengage seat cushion cover J straps from cushion pan panel.

- Remove the cover and cushion from the seat frame.

Installing

- Place the seat cushion cover and cushion together.

- Route pull strap through the slit on bottom of trim cover.

- Pull trim cover around corners of frame and secure J straps.

- Zip both sides of the seat cover.

- Install screw securing inboard and outboard recliner covers.

- Install screws securing rear grocery bag holder.

- Install seat into vehicle. Refer to => [ Seat ] Seat.