Seat Leg Latch Release Actuator and Cable

Seat Leg Latch Release Actuator and Cable

Removing






• The procedure for replacing the seat leg latch release actuator and cable is the same for both the 60 and 40 third row power folding seats. The following steps should be performed only on the seat with the inoperative seat leg latch release actuator and cable.

- Remove the effected third row power folding seat. Refer to => [ Seat ] Seat.

- Remove the seat cushion and cover assembly. Refer to => [ Seat Cushion and Cover ] Seat Cushion and Cover.

- Remove the cable from the seat leg.

- Remove the tie strap holding the switch wire harness and leg latch release cable to the seat leg (3).

- Push the cable connector (4) down to disengage it from the latch stud.

- Remove the cable sleeve from the seat leg bracket (5).

- Pull the cable up out of the seat leg.

- Repeat this procedure for the other seat leg.






- Remove the push pin retainers (1) securing the seat leg latch release actuator and cable (2) to the seat pan (6).

- Disconnect the seat leg latch release actuator and cable electrical connector (3).

- Pull the seat leg latch release actuator and cable (2) upward and separate it from the seat pan (6).

Installing






- Position the seat leg latch release actuator and cable (2) onto the seat pan (6).

- Connect the seat leg latch release actuator and cable electrical connector (3).

- Install the push pin retainers (1) securing the seat leg latch release actuator and cable (2) to the seat pan (6).






- Install the cable onto the seat leg.

- Route the cable through the seat pan and down the seat leg (3).

- Install the cable sleeve onto the seat leg cable bracket (5).

- Push the cable connector (4) up to secure it onto the latch stud.

- Install the tie strap holding the switch wire harness and leg latch release cable to the seat leg (3).

- Repeat this procedure for the other seat leg.

- Install the seat cushion and cover assembly. Refer to => [ Seat Cushion and Cover ] Seat Cushion and Cover.

- Install the third row power folding seat. Refer to => [ Seat ] Seat.

- Perform the third row power folding seat recliner calibration. Refer to => [ Third Row Power Folding Seat Recliner Calibration ] Third Row Power Folding Seat Recliner Calibration.