Lubrication System Components

Lubrication System Components

• The oil level must not go above the MAX mark - danger of causing damage to the catalytic converter!

• If large quantities of metal particles or abraded material are detected during engine repairs, it may mean the crankshaft or rod bearings are damaged. To prevent subsequent damage, the following work must be performed after the repair:

- Clean the oil channels.

- Replace the oil spray jets.

- Replace the engine oil cooler.

- Replace the oil filter.

Engine oil => [ Engine Oil ] Engine Oil

Parts of lubrication system - assembly overview => [ Lubrication System Components, Assembly Overview ] Service and Repair

Oil filter bracket with attachments - assembly overview => [ Oil Filter Bracket with Attachments, Assembly Overview ] Service and Repair

Oil pan, removing and installing => [ Oil Pan, Removing and Installing ] Service and Repair

Oil pump, removing and installing => [ Oil Pump, Removing and Installing ] Service and Repair

Oil pressure, checking => [ Oil Pressure and Oil Pressure Switch, Checking ] Testing and Inspection