Charge Air Pressure Sensor G31/Intake Air Temperature Sensor G42

Charge Air Pressure Sensor G31/Intake Air Temperature Sensor G42

Removing

- Remove the engine cover. Refer to => [ Engine Cover ] Engine Cover.

- Release and disconnect the connector - 4 - from the charge air pressure sensor/intake air temperature sensor.






- Remove the bolts - arrows - and remove the charge air pressure sensor/intake air temperature sensor - 2 - from the charge air cooler - 1 -.






Installing

Install in reverse order of removal. When doing this note the following:

• Replace the O-ring.

Tightening Specifications