Input Shaft, Output Shaft, Differential and Shift Rods Overview

Input Shaft, Output Shaft, Differential and Shift Rods Overview






1 Differential

• Disassembly and assembly, refer to => [ Differential ] Service and Repair.

2 Seal

• Quantity: 4

• Always replace.

3 Output Shaft

• Disassembly and assembly, refer to => [ Output Shaft ] Output Shaft.

4 Reverse Gear Shaft Support

• Disassembly and assembly, refer to => [ Reverse Shaft ] Reverse Shaft.

5 Reverse Gear Shaft

• Disassembly and assembly, refer to => [ Reverse Shaft ] Reverse Shaft.

6 Input Shaft

• Disassembly and assembly, refer to => [ Input Shaft ] Input Shaft.

7 Reverse Gear Selector Fork

• Disassembly and assembly, refer to => [ Shift Forks ] Shift Forks.

8 Inner TORX(R) Bolt

• 25 Nm

9 Selector Fork with Rail

• Overview, refer to => [ Selector Fork Overview ] Selector Fork Overview.

• Disassembly and assembly, refer to => [ Shift Forks ] Shift Forks.

10 Clutch Housing

• Disassembly and assembly, refer to => [ Clutch Housing ] Clutch Housing.

11 Nut

• 25 Nm + an additional 90° (1/4) turn.

• Always replace.

• For the support with taper roller bearing.

12 Flange Shaft with Pressure Spring

• Removing and installing, refer to.

=> [ Left Flange Shaft and Seal ] Left Flange Shaft and Seal

=> [ Right Flange Shaft and Seal ] Right Flange Shaft and Seal

• Assembling, refer to => [ Differential ] Service and Repair.

13 Countersunk Bolt

• 25 Nm