Steering Column Switch, Without KESSY Overview
Steering Column Switch, Without KESSY Overview
• There are different versions of the steering column electronic systems control module (J527) / steering column combination switch (E595) and the steering column switch base carrier depending on the manufacturer (Valeo or Kostal). The Valeo version is shown in the illustration.
1 Steering Column Electronic Systems Control Module (J527)
• Follow the removing and installing sequence. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.
• Removing and installing, refer to => [ Steering Column Electronics Control Module (J527), Valeo ] Steering Column Electronics Control Module (J527), Valeo or => [ Steering Column Electronics Control Module (J527), Kostal ] Steering Column Electronics Control Module (J527), Kostal.
• Coding, refer to => [ Steering Column Electronics Control Module (J527) Without KESSY, Coding ] Steering Column Electronics Control Module (J527) Without KESSY, Coding.
• Bolts: 1.5 Nm
2 Steering Column Combination Switch (E595)
• Follow the removing and installing sequence. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.
• Removing and installing, refer to => [ Steering Column Combination Switch (E595), Valeo ] Steering Column Combination Switch (E595), Valeo or => [ Steering Column Combination Switch (E595), Kostal ] Steering Column Combination Switch (E595), Kostal.
3 Base Carrier For Steering Column Switches
• Follow the removing and installing sequence. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.
• Removing and installing, refer to => [ Steering Column Switch Base Carrier, Valeo ] Steering Column Switch Base Carrier, Valeo or => [ Steering Column Switch Base Carrier, Kostal ] Steering Column Switch Base Carrier, Kostal.
4 Shear Bolts
• Break-off torque: approximately 15 Nm.
5 Steering Lock Housing
The steering lock housing must be remove and installed together with the steering column switch base carrier.
• Follow the removing and installing sequence. Refer to => [ Steering Column Switch Components, Removal and Installation Sequence ] Steering Column Switch Components, Removal and Installation Sequence.
• Removing and installing, refer to => [ Steering Column Switch Base Carrier, Valeo ] Steering Column Switch Base Carrier, Valeo or => [ Steering Column Switch Base Carrier, Kostal ] Steering Column Switch Base Carrier, Kostal.
6 Ignition Switch and Lock Cylinder
• Removing and installing, refer to => [ Ignition Switch (D) ] Ignition Switch (D).