Description Of Parameters

Description of parameters

Parameters, status

Switch lock button, left front
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch lock button, right front
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch lock button, left rear
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch lock button, right rear
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch unlocking, left front
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch unlocking, left rear
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch unlocking, right front
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch unlocking, right rear
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch unlocking, tailgate
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch quick lock, left front
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch quick lock, right front
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch quick lock, left rear
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch quick lock, right rear
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Switch key in
The parameter indicates the switch status
The parameter can have different two values:
- Activated = The handle of the door pulled out
- Not activated = The handle of the door unaffected.

Brake switch
The engine control module (ECM) transmits a signal on the Control area network (CAN) indicating whether the stop lamp switch is activated or not. The transmission control module (TCM) uses the signal for the internal gear functions and diagnosing the transmission.
OFF = Stop lamp switch unaffected
ON = Stop lamp switch affected

Switch, clutch pedal
The engine control module (ECM) transmits a signal on the Control area network (CAN) indicating whether the stop lamp switch is activated or not. The transmission control module (TCM) uses the signal for the internal gear functions and diagnosing the transmission.
OFF = Stop lamp switch unaffected
ON = Stop lamp switch affected

Parameters, value

Power supply KVM
The value indicates battery voltage at the control module.
Measurement range: 0.0 -25.5 V