Programming Customer Parameters

Programming customer parameters

Programming

Hint: If the infotainment control module (ICM) is installed the customer can carry out the settings below. Information is available in the car's driver's manual.

With this function the customer can chose in which order the doors are to be unlocked.

Four settings are available:
- Complete unlocking (all doors unlocked)
- Selective unlocking, one of the front doors
- Selective unlocking, both front doors
- Selective unlocking, the doors on the same side.

Carry out the following:
- Click the VCT2000 symbol to begin programming
- Select which function is to be activated and press start.
Check that programming has been successful by locking and unlocking. Check that the doors which should be locked are locked and that those which should be open are open.






Continue - DONE

-------------------------------------------------