Mode 9: Vehicle Information

Mode 9: Vehicle Information

In this diagnostic mode, vehicle specific diagnostic data such as e.g. the control module versions will be displayed.

Test requirement:
- No DTCs in DTC memory; Check DTC memory. Mode 3: Check DTC Memory

Procedure
- Connect diagnostic tester. Connect Diagnostic Tester
- Switch ignition on.
- In diagnostic function "33 - OBD", select "Mode 9: vehicle information".
- Via the following table, select the desired vehicle information according to Test-ID (Test Identification).

Display vehicle information

Test-ID Diagnostic text
04: Calibration identification e.g.
8E0909518AK 0003 Engine Control Module (ECM) identification
8E0927156S 1212 Transmission control module identification (for vehicles with automatic transmission)
06: CVN (check sum) e.g.
0000F4A8 The check sum is different for every control module version
No results

- End diagnosis and switch ignition off.