Diagnostic Trouble Code (DTC) Memory, Erasing

Diagnostic Trouble Code (DTC) Memory, Erasing

NOTE: If it is not possible to erase DTC memory, check it once again and remedy malfunctions.

Requirements
- DTC memory checked. Diagnostic Trouble Code (DTC) Memory, Checking
- All malfunctions repaired.

After DTC memory has been successfully checked:







Display on VAS5051:
- Under -1- select diagnostic function "05 - Erase DTC memory".







Display on VAS5051:
1. No display (before erasing)
or
- DTC memory erased

NOTE: The following message appears in display zone -1-: "DTC memory not yet checked", if the operational sequence was not adhered to exactly. If the DTC memory has been checked beforehand, the DTC memory can only be erased.

2. NOTE:
- Should the function be carried out?
- Data will be erased.

- Press "OK" button in display -2-.
- Exit function "05 - Erase DTC memory" by pressing square button.
- Check DTC memory again after repair work and erase it if necessary.

NOTE: This erases DTCs that have been stored while the malfunction was being fixed, for example, malfunctions that have arisen as a result of connectors being detached.