Right Luggage Compartment Relay and Fuse Panel

Right Luggage Compartment Relay and Fuse Panel

Removing





- With ignition switched off, disconnect battery ground (ND) wire. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove ground stud - 3 - and nut - 2 -.

- Detach energy management control module (J644).

- Unplug connectors - 1 -.

- Release comfort system central control module (J393) - arrows - and detach it from relay and fuse panel.





• Electrical connectors remain connected.

- Open the cover - 1 -.





- Remove wires - 2 through 6 -.

- Remove nuts - arrows - and detach relay and fuse panel.

- Remove the fuse panel on the relay- and fuse panel.

- Detach relays and control modules and then unclip appropriate relay carrier.

• For exact assignment of relay and fuse panel in right luggage compartment, refer to current wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install energy management control module. Refer to => [ Installing ] Service and Repair, observing installation sequence.

Tightening Specifications