Fuel Level Sensor Assembly Overview

Fuel Level Sensor Assembly Overview





1 Fuel Delivery Unit Baffle Housing

• Clipped in at fuel tank

• Cannot be replaced separately

2 Electrical Wire

• To the fuel level sensor (G)

3 Right Locking Flange

4 Seal

• Replace

• Install dry

5 Locking Ring

• Use wrench (T10202) for removal and installation

• 125 Nm

6 Electrical Wire

• To the fuel level sensor 2 (G169)

7 Fuel Level Sensor 2 (G169)

• Resistance values, checking, refer to => [ Fuel Level Sensor 2, Checking ] Fuel Level Sensor 2, Checking

• Removing and installing, refer to => [ Fuel Level Sensor 2 ] Fuel Level Sensor 2

8 Bracket

• For fuel level sensor 2

• Clipped on to the baffle housing

9 Locking Ring

• Use wrench (T10202) for removal and installation

• 125 Nm

10 Seal

• Replace

• Install dry

11 Left Locking Flange

12 Fuel Level Sensor 4 (G393)

• Resistance values, checking, refer to => [ Fuel Level Sensor 4, Checking ] Fuel Level Sensor 4, Checking

• Removing and installing, refer to => [ Fuel Level Sensor 4 ] Fuel Level Sensor 4

13 Bracket

• For Fuel Level Sensor 4 (G393)

• Clipped on to the mount

14 Support

• Clipped in at fuel tank

• Cannot be replaced separately

15 Electrical Wire

• To the fuel level sensor 4 (G393)

16 Support

• Clipped in at fuel tank

17 Fuel Level Sensor 3 (G237)

• Resistance values, checking, refer to => [ Fuel Level Sensor 3, Checking ] Fuel Level Sensor 3, Checking

• Removing and installing, refer to => [ Fuel Level Sensor 3 ] Fuel Level Sensor 3

18 Electrical Wire

• To the fuel level sensor 3 (G237)

19 Fuel Level Sensor (G)

• Resistance values, checking, refer to => [ Fuel Level Sensor, Checking ] Fuel Level Sensor, Checking

• Removing and installing, refer to => [ Fuel Level Sensor ] Fuel Level Sensor

Locking Flange Cover - Tightening Specifications





1. Bolt - 9 Nm

2. Locking flange cover

3. Seal - replace if damaged