0B5A Automatic Transmission

Selector Lever Cable Assembly Overview





1 Retaining clip

• For selector lever cable to selector mechanism function unit

2 O-Ring

• Replace

3 Bolt

• For selector lever cable adjustment

• Secured on the shift mechanism function unit

• 13 Nm

4 Selector lever cable

• Do not bend or kink

• Different versions depending on the vehicle, allocation

• Removing and installing, refer to => [ Selector Lever Cable ] 0B5A Automatic Transmission

• In case of damaged rubber boot, selector lever cable must be replaced

• Lightly lubricate ball socket with Polycarbamide Grease (G 052 142 A2) before installing.

• When installing, make sure rubber sleeve on transmission side is not twisted

• Adjusting, refer to => [ Selector Lever Cable, Adjusting ] Selector Lever Cable, Adjusting

5 Selector shaft lever

6 Retaining clip

• For selector lever cable to the cable mounting bracket

7 Cable mounting bracket

8 Bolt

• 8 Nm

9 Bolt

• 8 Nm