Input Shaft: Service and Repair

Grooved Ball Bearing Changes

From transmission build date 4.10.06 through approximately 1.21.08

A spacer washer above and below the grooved ball bearing seat - 6 - => [ Grooved Ball Bearing ] Input Shaft Assembly Overview.

Above the Bearing Seat










Below the Bearing Seat - arrow -:





Slightly deeper from transmission build date 4/10/06 through approximately 1/20/08.

The grooved ball bearing seat - arrow - is slightly deeper in order to accommodate the spacer washer under the bearing - 6 - => [ Grooved Ball Bearing ] Input Shaft Assembly Overview.






Flattened areas on the grooved ball bearing - A - and bearing seat - B - in the transmission housing approximately from transmission build date 2.21.08.





• If the flattened areas are present, do not insert any spacer washers above and below the grooved ball bearing.