Backrest Cover and Backrest Cushion for Standard Seat, Separating and Connecting

Backrest Cover and Backrest Cushion for Standard Seat, Separating and Connecting

Special tools, testers and auxiliary items required

• Upholstery clip pliers (V.A.G 1634)

Removing






- Remove backrest cover together with backrest cushion. Refer to => [ Backrest Cover with Backrest Cushion for Standard Seat ] Backrest Cover with Backrest Cushion for Standard Seat.

- Pull off backrest cover - 1 - from the backrest cushion - 2 - as far as possible and cut upholstery clips - 3 - using pliers.

- Version with backrest heating: Disconnect the connector.

Installing

Install in reverse order of removal. Note the following:

- Install new upholstery clips using upholstery clip pliers (V.A.G 1634).

Installation note: For example tightening specifications, replace components. Refer to => [ Backrest Cover and Backrest Cushion for Standard Seat Assembly Overview ] Backrest Cover and Backrest Cushion for Standard Seat Assembly Overview.