Suppressor (C24)

Suppressor (C24)

Observe notes on contact corrosion. Refer to=> [ Contact Corrosion ] Service Precautions.

Removing






- Turn off the ignition and disconnect the ground cable from the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove the bolts - 1 and 3 - and remove the right upper longitudinal member - 2 -.

- Remove the screws - arrows - and remove the cover - 1 - for the right plenum chamber E-box.






- Open the retainers - arrow - and remove the relay panel and fuse panel - 1 -.






- Disconnect the electrical connector - 3 -.






- Open the tab - 2 - and remove the Suppressor - 1 - upward - arrow -.

Installing

Install in reverse order of removal. Note the following:

- Install the relay and fuse panel. Refer to => [ Relay and Fuse Panel in Right Plenum Chamber E-Box ] Relay and Fuse Panel in Right Plenum Chamber E-Box.