Quarter Upper Trim Panel Replacement

Quarter Upper Trim Panel Replacement

Removal Procedure

1. Remove the center pillar trim. Refer to Center Pillar Upper Trim Panel Replacement (Center Pillar Upper Trim Panel Replacement).
2. Remove the rear assist handle and coat hook. Refer to Assist Handle and Rear Coat Hook Replacement (Assist Handle and Rear Coat Hook Replacement).
3. Remove the roof rail courtesy reading lamp. Refer to Roof Side Rail Lamp Replacement in Lighting Systems.




4. Remove the bolt from the rear seat shoulder height adjuster. Refer to Rear Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.
5. Remove the screws covers.
6. Remove the 2 screws from the rear quarter trim finish panel.
7. Remove the rear quarter trim finish panel.
Pull back on the rear quarter trim finish panel in order to release the clips on the backside.

Installation Procedure

1. Install the rear quarter trim finish panel.
Push in on the rear quarter trim finish panel in order to insert clips.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the 2 screws to the rear quarter trim finish panel.

Tighten the screws to 2 Nm (18 lb in).

3. Install the screw covers.




4. Install the bolt to the rear seat shoulder height adjuster. Refer to Rear Seat Shoulder Belt Guide Adjuster Replacement in Seat Belts.
5. Install the roof rail courtesy reading lamp. Refer to Roof Side Rail Lamp Replacement in Lighting Systems.
6. Install the rear assist handle and coat hook. Refer to Assist Handle and Rear Coat Hook Replacement (Assist Handle and Rear Coat Hook Replacement).
7. Install the center pillar trim. Refer to Center Pillar Upper Trim Panel Replacement (Center Pillar Upper Trim Panel Replacement).