Generator Bracket Replacement (LG5 without A/C)

Generator Bracket Replacement (LG5 without A/C)

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Cautions and Notices

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Replacement (Negative Cable to Frame) Battery Negative Cable Replacement (Negative Cable to Frame)Battery Negative Cable Replacement (Negative Cable to Engine) Battery Negative Cable Replacement (Negative Cable to Engine).
2. Remove the drive belt.




3. Loosen the generator mounting bottom bolt.
4. Remove the generator mounting top bolt.
5. Remove the generator adjusting bracket mounting bolts.
6. Remove the generator adjusting bracket from the fan drive support assembly.

Installation Procedure




1. Install the generator adjusting bracket to the fan drive support assembly.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the generator adjusting bracket mounting bolts.

Tighten the generator adjusting bracket mounting bolts to 73 Nm (54 lb ft).

3. Install the generator mounting top bolt.

Tighten the generator mounting top bolt to 88 Nm (65 lb ft).

4. Install the generator mounting bottom bolt.

Tighten the generator mounting bottom bolt to 71 Nm (52 lb ft).

5. Install the drive belt.
6. Connect the negative battery cable. Refer to Battery Negative Cable Replacement (Negative Cable to Frame) Battery Negative Cable Replacement (Negative Cable to Frame)Battery Negative Cable Replacement (Negative Cable to Engine) Battery Negative Cable Replacement (Negative Cable to Engine).