Active Test

ACTIVE TEST

CAUTION:
- Never perform the active test while driving.
- Active test cannot be started while LDW indicator lamp is illuminated.

1. Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen. Refer to DI-92, "CONSULT-II BASIC OPERATION".
2. Touch any field, "BUZZER DRIVE ", "SYSTEM ON LAMP DRIVE" and "INDICATOR LAMP DRIVE", on selection screen.
3. Touch necessary item and "START".
4. Active test screen will be shown.

BUZZER DRIVE




Touch "ON" and "OFF" to check if LDW chime operates as follows.

SYSTEM ON LAMP DRIVE




Touch "ON" and "OFF" to check if LDW system ON indicator operates as follows.

NOTE: Perform "SYSTEM ON LAMP DRIVE" when LDW system ON indicator turns OFF.

INDICATOR LAMP DRIVE




Touch "ON" and "OFF" to check that LDW indicator lamp operates as follows.