B2108

B2108 STEERING LOCK RELAY





Description
The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN communication.
IPDM E/R turns the steering lock relay ON and transmits the release of the steering to BCM.




DTC Logic

DTC DETECTION LOGIC

NOTE:
If DTC B2108 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. SEC.






DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Press the push-button ignition switch under the following conditions and wait for at least 1 second.
- Selector lever is in the P or N position.
- Do not depress brake pedal.
2. Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES - Go to B2108.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK STEERING LOCK RELAY
Check voltage between IPDM E/R harness connector and ground.





Is the inspection normal?
YES - GO TO 2.
NO - Replace IPDM E/R. Removal and Installation.
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END