B2606
B2606 STEERING LOCK RELAY
Description
The steering lock relay ON signal is transmitted to IPDM E/R by BCM via CAN communication.
IPDM E/R turns the steering lock relay ON and transmits the release of the steering to BCM.
DTC Logic
DTC DETECTION LOGIC
NOTE:
- If DTC B2606 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. SEC.
- If DTC B2606 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. SEC.
DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Press the push-button ignition switch under the following conditions.
- Selector lever is in the P or N position.
- Do not depress brake pedal.
2. Steering is locked.
3. Check "Self diagnostic result" with CONSULT-III.
Is DTC detected?
YES - Go to B2606.
NO - INSPECTION END
Diagnosis Procedure
1.CHECK DTC WITH IPDM E/R
Check "Self diagnostic result" with CONSULT-III. Testing and Inspection.
Is the inspection result normal?
YES - GO TO 2.
NO - Replace IPDM E/R. Removal and Installation.
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END