Back Pillar Garnish

LUGGAGE FLOOR TRIM


BACK PILLAR GARNISH : Removal and Installation


REMOVAL
1. Remove luggage side lower finisher. Luggage Side Lower Finisher.
2. Remove cap of back door finisher side (LH), and then remove stud ball. Back Door Support Rod Procedures, "BACK DOOR
SUPPORT ROD : Removal and Installation" (LH side only).





3. Disengage back pillar garnish (1) fixing clips and pawl using a remover tool (A), and then remove back pillar garnish.

Circle : Clip
Triangle : Pawl

INSTALLATION
Note the following items, and install in the reverse order of removal.

CAUTION:
- Visually check the clips and pawl for deformation and damage during installation. Replace with new ones if necessary.
- When installing back pillar garnish, check that clips and pawl are securely fitted in body panel holes, and press them in.