Removal and Installation

DIFFERENTIAL SIDE OIL SEAL

Removal and Installation


REMOVAL

1.Remove front fender protector side cover (LH) or (RH) as necessary. Refer to "FENDER PROTECTOR : Exploded View" Exploded View.
2.Remove transfer assembly (RH only) (AWD models). Refer to "Removal and Installation" Removal and Installation.
3.Remove front drive shaft. Refer to "Removal and Installation (Left Side)" Removal and Installation Left Side or "Removal and Installation (Right Side)" Removal and Installation Left Side.





4.Remove differential side oil seal (1), using suitable tool (A).

CAUTION:
Be careful not to scratch transaxle case and converter housing.

INSTALLATION

Installation is in the reverse order of removal.
- Install each differential side oil seal evenly using Tool so that differential side oil seal protrudes by the dimension (C) respectively.

CAUTION:
- Do not reuse differential side oil seals.
- Apply CVT fluid to differential side oil seals.
Revision: March 20122013 Infiniti JX





- 2WD models















- AWD models