Transmission Mode Switch: Service and Repair

TOW MODE SWITCH

Removal and Installation

NOTE:
Tow mode switch is integrated in to SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or
4WD switch assembly (4WD models).

REMOVAL

1.Remove console finisher assembly from center console assembly. Refer to "Removal and Installation" Removal and Installation.
2.Disconnect SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or 4WD switch assembly (4WD models) harness connector.
3.Press SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or 4WD switch assembly (4WD models) fixing pawls, and remove SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD
models) or 4WD switch assembly (4WD models) from console finisher assembly.

INSTALLATION

Install in the reverse order of removal.