Roof Opening Panel Glass

Roof Opening Panel Glass

Removal
1 Open the roof opening panel shield.
2 Raise the roof opening panel glass.




3 Release the upper edges of the RH and LH roof opening panel side trims.
4 Remove the RH and LH roof opening panel side trims.
- Release the front of the RH and LH roof opening panel side trims and slide forwards.




5 Remove the roof opening panel glass.
- Remove the 6 screws.

Installation
1 Install the roof opening panel glass.
- Tighten the screws to 6 Nm (4 lb.ft).
2 Align the roof opening panel glass to the roof. For additional information, refer to Roof Opening Panel Alignment Procedures
3 Install the RH and LH roof opening panel side trims, starting with the rear ends.
4 Secure the upper edges of the RH and LH roof opening panel side trims.