Removal

LIGHTING (EXT): HEADLIGHT ASSEMBLY (for HID Headlight): REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
* w/ Navigation System:
After the engine switch is turned off, the display and navigation module display (navigation system) records various types of memory and settings. As a result, after turning the engine switch off, be sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal





* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE RADIATOR GRILLE

(a) Remove the radiator grille Removal.

3. REMOVE FRONT BUMPER COVER Removal

4. REMOVE FRONT BUMPER BAR REINFORCEMENT LH Removal

5. REMOVE HEADLIGHT ASSEMBLY LH

(a) Remove the bolt, 2 screws and clip.





(b) Detach the clamp.

(c) Disconnect the connectors and remove the headlight.