Removal

2UR-FSE COOLING: WATER PUMP: REMOVAL

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

3. REMOVE ENGINE ROOM SIDE COVER RH Removal

4. REMOVE NO. 1 AIR CLEANER INLET Removal

5. REMOVE NO. 1 ENGINE UNDER COVER Removal

6. DRAIN ENGINE COOLANT Service and Repair

7. REMOVE RADIATOR RESERVOIR ASSEMBLY Removal

8. REMOVE INTAKE AIR CONNECTOR PIPE Removal

9. REMOVE V-RIBBED BELT Removal

10. DISCONNECT NO. 2 RADIATOR HOSE Removal

11. DISCONNECT WATER HOSE SUB-ASSEMBLY






(a) Remove the bolt and disconnect the water hose.
12. DISCONNECT WIRE HARNESS






(a) Remove the bolt and disconnect the wire harness.
13. DISCONNECT NO. 5 WATER BY-PASS HOSE






(a) Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the No. 5 water by-pass hose.
14. DISCONNECT WATER INLET HOSE






(a) Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the water inlet hose.
15. DISCONNECT INLET HEATER WATER HOSE






(a) Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the heater water hose.
16. REMOVE WATER INLET HOUSING






(a) Remove the 3 bolts, water inlet housing and gasket.
17. REMOVE WATER PUMP PULLEY






(a) Using SST, hold the water pump pulley.
SST: 09960-10010
09962-01000
09963-01000
(b) Remove the 4 bolts and water pump pulley.
18. REMOVE WATER PUMP






(a) Remove the 9 bolts, water pump and gasket.