C1300

BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: C1300: Skid Control ECU Malfunction

DTC C1300 - Skid Control ECU Malfunction

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the ECU by self-diagnosis.






INSPECTION PROCEDURE
NOTICE:
When replacing the skid control ECU, perform the following operations:
- Initialization of linear solenoid valve and calibration Programming and Relearning
- Yaw rate and acceleration sensor zero point calibration Programming and Relearning

PROCEDURE

1. REPLACE SKID CONTROL ECU
(a) Replace the skid control ECU Removal.
NEXT -- PERFORM TEST MODE (SIGNAL CHECK)