Installation

NAVIGATION: MULTI-DISPLAY (w/ Navigation System): INSTALLATION

INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.





1. INSTALL NO. 2 RADIO BRACKET
(a) Install the bracket with the 2 bolts.





2. INSTALL NO. 1 RADIO BRACKET
(a) Install the bracket with the 2 bolts.
3. INSTALL MULTI-DISPLAY ASSEMBLY WITH BRACKET
(a) Connect the connectors.





(b) Insert the display and attach the 6 clips on its backside.
HINT: Evenly push the right and left sides of the display into the instrument panel.





(c) Install the display with the 2 bolts.
4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET Installation
5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
6. INSTALL REAR UPPER CONSOLE PANEL Installation
7. INSTALL NO. 3 BOX PANEL Installation
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
9. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation
10. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

12. INSTALL BATTERY SERVICE HOLE COVER LH Installation
13. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation