Removal

SEAT: SEAT VIBRATOR MODULE ASSEMBLY (for Ottoman): REMOVAL

REMOVAL

1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
2. REMOVE DECK TRIM SIDE BOARD LH (w/o Spare Tire) Removal
3. REMOVE BATTERY SERVICE HOLE COVER LH Removal
4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE BATTERY SERVICE HOLE COVER Removal
6. REMOVE ROPE HOOK Removal
7. REMOVE ROPE HOOK ASSEMBLY Removal
8. REMOVE DECK TRIM SIDE BOARD RH Removal
9. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Removal
10. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) Removal
11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER Removal
12. REMOVE DECK BOARD ASSEMBLY (w/o Spare Tire)
13. REMOVE TOOL BOX (w/o Spare Tire) Removal
14. REMOVE REAR FLOOR FINISH PLATE Removal
15. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH Removal





16. REMOVE SEAT VIBRATOR MODULE ASSEMBLY
(a) Detach the 2 claws and disconnect the air hose connector.
(b) Detach the wire harness clamp.
(c) Disconnect the connector.
(d) Remove the 3 bolts and the module.