Installation

WIPER AND WASHER: RAIN SENSOR: INSTALLATION

INSTALLATION

1. INSTALL RAIN SENSOR TAPE





(a) If reusing the rain sensor:
Install new rain sensor tape.
(1) Remove the used rain sensor tape from the windshield glass or rain sensor.
(2) Apply new rain sensor tape on the rain sensor lens surface in the area indicated by the hatched area.
- Keep the tape's exposed adhesive free from dust and fingerprints.
- Apply the tape exactly according to the specifications below.
Specification:






2. INSTALL RAIN SENSOR
NOTICE:
- Make sure the adhesive between the bracket and windshield glass is normal.
- If there is any residue left from the rain sensor tape on the windshield, remove it.
- Clean the glass surface with cloth or similar material.
- Make sure there are no air bubbles between the rain sensor and windshield.

(a) Peel the separation paper from the rain sensor tape.
(b) Securely attach the rain sensor to the bracket.
(c) Push in the stopper.
(d) Connect the connector.





3. INSTALL INNER REAR VIEW MIRROR ASSEMBLY Installation
4. INSTALL RAIN SENSOR COVER Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL BATTERY SERVICE HOLE COVER LH Installation
7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Installation