Operation Check

SUSPENSION CONTROL: ACTIVE STABILIZER SUSPENSION SYSTEM: OPERATION CHECK

1. FRONT ACTIVE STABILIZER CONTROL ACTUATOR FUNCTION INSPECTION

(a) Turn the power switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch ON (READY) and the Techstream on.

(d) Follow the Techstream screen's display and perform the front active stabilizer Active Test.

HINT
If the Active Test cannot be performed, check for DTCs Active Stabilizer Suspension System. If test mode DTC C194F and/or C1950 are output, refer to the appropriate flowchart C194F.

(e) During the Active Test, check that the front active stabilizer operates.

NOTICE:
During the Active Test, do not drive the vehicle.





OK:

Front active stabilizer operates

2. REAR ACTIVE STABILIZER CONTROL ACTUATOR FUNCTION INSPECTION

(a) Turn the power switch OFF.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch ON (READY) and the Techstream on.

(d) Follow the Techstream screen's display and perform the rear active stabilizer Active Test.

HINT
If the Active Test cannot be performed, check for DTCs Active Stabilizer Suspension System. If test mode DTC C194F and/or C1951 are output, refer to the appropriate flowchart C194F.

(e) During the Active Test, check that the rear active stabilizer operates.

NOTICE:
During the Active Test, do not drive the vehicle.





OK:

Rear active stabilizer operates