Installation

SEAT: FRONT SEAT ASSEMBLY (for Power Seat): INSTALLATION

1. INSTALL FRONT SEAT ASSEMBLY

(a) Place the front seat assembly in the cabin.

NOTICE:
Be careful not to damage the vehicle body.

(b) Connect the connectors under the seat.

(c) Connect the cable to the negative (-) battery terminal.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

(d) Temporarily install the front seat assembly with the 4 bolts.

(e) Operate the power seat switch knob and move the seat to the rearmost position.

(f) Tighten the 2 bolts on the front side of the seat.





Torque : 37 Nm (375 kgf-cm, 27 ft-lbf)

NOTICE:
Tighten the bolts in the order indicated in the illustration.

(g) Operate the power seat switch knob and move the seat to the foremost position.

(h) Tighten the 2 bolts on the rear side of the seat.





Torque : 37 Nm (375 kgf-cm, 27 ft-lbf)

NOTICE:
Tighten the bolts in the order indicated in the illustration.

2. INSTALL REAR INNER SEAT TRACK BRACKET COVER

(a) Engage the 2 claws to install the rear inner seat track bracket cover.

3. INSTALL REAR OUTER SEAT TRACK BRACKET COVER

(a) Engage the 2 claws to install the rear outer seat track bracket cover.

4. INSTALL FRONT INNER SEAT TRACK BRACKET COVER

(a) Operate the power seat switch knob and move the seat to the rearmost position.

(b) Engage the 2 claws to install the front inner seat track bracket cover.

5. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER

(a) Engage the 2 claws to install the front outer seat track bracket cover.

6. INSTALL FRONT SEAT HEADREST ASSEMBLY

7. INSTALL REAR FLOOR BOARD UPPER NO. 3 PLATE Installation

8. INSTALL DECK FLOOR BOX RH Installation

9. INSTALL REAR NO. 3 FLOOR BOARD Installation

10. INSTALL REAR DECK FLOOR BOX Installation

11. INSTALL REAR NO. 2 FLOOR BOARD Installation

12. INSPECT FRONT SEAT ASSEMBLY

(a) Check the power seat operation.

w/o Seat Position Memory System: Front Power Seat Control System (W/O Memory)

w/ Seat Position Memory System: Operation Check

(b) w/ Seat Heater System:

Check the seat heater operation.

(1) Turn the power switch on.

(2) Turn the seat heater switch on.

(3) Wait 5 minutes or more and confirm that the seat surface becomes warm.

13. INSPECT SRS WARNING LIGHT

Diagnosis System