Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL

1. REMOVE FRONT CONSOLE BOX

Removal

2. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

Removal

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal

4. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY Removal

5. REMOVE CONSOLE BOX INSERT Removal

6. REMOVE CONSOLE BOX LH Removal

7. REMOVE FRONT NO. 2 CONSOLE BOX INSERT Removal

8. REMOVE CONSOLE BOX RH Removal

9. REMOVE NO. 3 CONSOLE BOX MOUNTING BRACKET (w/ Navigation System for DVD) Removal

10. REMOVE MULTI-MEDIA MODULE ASSEMBLY (w/ Navigation System for DVD) Removal

11. REMOVE NO. 5 DISC PLAYER BRACKET (w/ Navigation System for DVD) Removal

12. REMOVE AIRBAG SENSOR ASSEMBLY

(a) Check that the power switch is off.

(b) Check that the cable is disconnected from the negative (-) auxiliary battery terminal.

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

(c) Disconnect the connectors from the airbag sensor assembly as shown in the illustration.





NOTICE:
When disconnecting any airbag connector, take care not to damage the airbag wire harness.

(d) Remove the 3 bolts and airbag sensor assembly.