Removal

2UR-GSE INTAKE / EXHAUST: EXHAUST MANIFOLD: REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSMISSION

Removal

2. REMOVE OIL LEVEL DIPSTICK SUB-ASSEMBLY

(a) Remove the oil level dipstick sub-assembly.

3. REMOVE OIL LEVEL DIPSTICK GUIDE SUB-ASSEMBLY

(a) Remove the bolt and oil level dipstick guide sub-assembly.





(b) Remove the O-ring from the oil level dipstick guide sub-assembly.

4. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

(a) Disconnect the air fuel ratio sensor connector.





(b) Remove the 3 bolts and No. 1 exhaust manifold heat insulator.

5. REMOVE AIR FUEL RATIO SENSOR Removal

6. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH

(a) Remove the 8 nuts and exhaust manifold sub-assembly RH.





(b) Remove the gasket.





7. REMOVE ENGINE MOUNTING DAMPER

(a) Remove the bolt and engine mounting damper.





8. REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

(a) Disconnect the air fuel ratio sensor connector.





(b) Remove the 3 bolts and No. 2 exhaust manifold heat insulator.

9. REMOVE AIR FUEL RATIO SENSOR Removal

10. REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH

(a) Remove the 8 nuts and exhaust manifold sub-assembly LH.





(b) Remove the gasket.