Removal

SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE LAP BELT OUTER ANCHOR COVER LH (for LH Side) Removal

3. REMOVE FRONT SEAT BELT ANCHOR COVER SUB-ASSEMBLY (for RH Side) Removal

4. SEPARATE FRONT SEAT OUTER BELT ASSEMBLY LH (for LH Side) Removal

5. SEPARATE FRONT SEAT OUTER BELT ASSEMBLY RH (for RH Side) Removal

6. REMOVE FRONT DOOR SCUFF PLATE Removal

7. REMOVE REAR DOOR SCUFF PLATE Removal

8. REMOVE LOWER CENTER PILLAR GARNISH Removal

9. REMOVE CENTER PILLAR GARNISH Removal

10. REMOVE FRONT SEAT OUTER BELT ASSEMBLY

(a) Remove the nut and disconnect the shoulder anchor of the front seat outer belt assembly.





(b) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector as shown in the illustration.





HINT
Tape the screwdriver tip before use.

(c) Disconnect the connector.

(d) Remove the 2 bolts and the front seat outer belt assembly.