Headliner Removal/Installation

HEADLINER REMOVAL/INSTALLATION

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable.

3. Partially peel back the seaming welt.

4. Remove the following parts:
a. A-pillar trim A-Pillar Trim Removal/Installation

b. Front scuff plate inner Front Scuff Plate Removal/Installation

c. Rear scuff plate Rear Scuff Plate Removal/Installation

d. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

e. Front seat belt upper anchor installation bolt Front Seat Belt Removal/Installation

f. B-pillar upper trim B-Pillar Upper Trim Removal/Installation

g. Rear package tray lid Service and Repair

h. Sub-trunk Service and Repair

i. Third-row seat Third-Row Seat Removal/Installation

j. Rear header trim Rear Header Trim Removal/Installation

k. Trunk end trim Trunk End Trim Removal/Installation

l. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

m. Cargo compartment light Service and Repair

n. Trunk side trim

o. Second-row seat belt upper anchor installation bolt Second-Row Seat Belt Removal/Installation

p. C-pillar trim C-Pillar Trim Removal/Installation

q. Map light Service and Repair

r. Assist handle Service and Repair

s. Sunvisor Service and Repair

5. Disconnect the roof wiring harness connector and detach the roof wiring harness connector clip from the body.

6. Disconnect the rear washer hose.

7. Disconnect the antenna feeder.

8. Remove the seaming welt. (vehicles with sunroof)

9. Remove the fasteners.

10. Take the headliner out from the opened liftgate.






11. Install in the reverse order of removal.