Side Panel Removal/Installation

SIDE PANEL REMOVAL/INSTALLATION

1. Partially peel back the seaming welt.

2. Remove the following parts:
a. Front scuff plate Front Scuff Plate Removal/Installation

b. Front side trim Front Side Trim Removal/Installation

c. Rear console Rear Console Removal/Installation

d. Shift lever knob (MTX) Service and Repair

e. Side wall Side Wall Removal/Installation

f. Front console component Front Console Component Removal/Installation

g. Hood release lever Service and Repair

h. Lower panel Lower Panel Removal/Installation

3. Pull the side panel in the direction of the arrow shown in the figure and remove it while detaching clips A and B.






4. Install in the reverse order of removal.